JL Audio 13W3V3-4

Kodas:

370,00 EUR
Su mokesčiais
  • Security policy (edit with Customer reassurance module) Security policy (edit with Customer reassurance module)
  • Delivery policy (edit with Customer reassurance module) Delivery policy (edit with Customer reassurance module)
  • Return policy (edit with Customer reassurance module) Return policy (edit with Customer reassurance module)

General Specifications

Table_Image
Continuous Power Handling (RMS) 600 W
Recommended Amplifier Power (RMS) 150 - 600 W
Nominal Impedance (Znom) 4 Ω

Physical Specifications

Table_Image
Nominal Diameter 13.5 in / 345 mm
Overall Diameter (A) 14.0 in / 356 mm
Mounting Hole Diameter (B) 12.5625 in / 319 mm
Bolt Hole Circle Diameter (C) 13.2 in / 335 mm
Motor Outer Diameter (D) 5.79 in / 147 mm
Mounting Depth (E) 7.63 in / 194 mm
Driver Displacement 0.096 cu ft / 2.72 liters
Net Weight 17.75 lb / 8.05 kg

Parameters

Free Air Resonance (Fs) 23.66 Hz
Electrical “Q” (Qes) 0.465
Mechanical “Q” (Qms) 6.774
Total Speaker “Q” (Qts) 0.435
Equivalent Compliance (Vas) 4.793 cu ft / 135.74 L
One-Way Linear Excursion (Xmax)* 0.610 in / 15.5 mm
Reference Efficiency (no) 0.37%
Efficiency (1 W / 1 m)** 87.90 dB SPL
Effective Piston Area (Sd) 103.850 sq in / 0.0670 sq m
DC Resistance (Re) 3.569 Ω

* Xmax specifications are derived via one-way voice coil overhang method with no correction factors applied.
** Efficiency (1 W / 1 m) is not an accurate indicator of a subwoofer’s output capability and should not be used as a comparison to other subwoofers to determine which one is “louder”.

Sealed Enclosure Specifications

Table_Image
Wall Thickness 0.75 in / 19 mm
Front Baffle Thickness 0.75 in / 19 mm
Volume (net int.) 1.500 cu ft / 42.5 L
External Width (W) 16 in / 406 mm
External Height (H) 16 in / 406 mm
External Depth (D) 14.625 in / 371 mm
F3 40.4 Hz
Fc 48.5 Hz
Qtc 0.89

Enclosure Notes
* The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.
* All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account.
* When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support.
* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance.
* All specifications are subject to change without notice.

Safety Notice
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.

When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van.

Ported Enclosure Specifications

Table_Image
Wall Thickness 0.75 in / 19 mm
Front Baffle Thickness 0.75 in / 19 mm
Volume (net int.) 2.25 cu ft / 63.7 L
External Width (W) 21.75 in / 552 mm
External Height (H) 17 in / 432 mm
External Depth (D) 18 in / 457 mm
Internal Slot Port Width (SW) 1.5 in / 38 mm
Internal Slot Port Height (SH) 15.5 in / 394 mm
Internal Slot Port Length (SL) 34.375 in / 873 mm
Port Extension Length (EL) 15.625 in / 397 mm
Tuning Frequency (Fb) 27 Hz
F3 35 Hz

Enclosure Notes
* The enclosure recommendations listed above are external dimensions which assume the use of 0.75 in (19 mm) thick material. If you are using 0.625 in (16 mm) thick material, subtract 0.25 in (6.5 mm) from each dimension. Do not use any material with a thickness of less than 0.625 in (16 mm) as this may compromise the rigidity of the enclosure.
* All enclosure volumes listed above are net internal volumes! Driver displacement, port displacement and brace displacement must be added to obtain the final gross internal volume. All enclosure dimensions above have already taken this into account.
* When using multiple subwoofers in a common enclosure you will need to recalculate the enclosure and port dimensions. For assistance please contact your authorized JL Audio dealer or JL Audio Technical Support.
* We recommend the use of this speaker in a bi-amplified system using high-quality satellite speakers and a high-quality amplifier. We do not recommend the use of this subwoofer with a passive crossover (coil), as this type of device will adversely affect performance.
* All specifications are subject to change without notice.

Safety Notice
Prolonged exposure to sound pressure levels in excess of 100dB can cause permanent hearing loss. This high-performance speaker can exceed this level. Please exercise restraint in its operation in order to preserve your ability to enjoy its fidelity.

When installing a subwoofer in your vehicle, it is extremely important to secure the enclosure firmly. We recommend bolting the enclosure through the metal of the floorpan or the frame of the vehicle with large diameter washers for reinforcement. If an enclosure is not firmly attached, it can become a projectile in a collision. This is particularly important in a hatchback, station wagon, sports utility vehicle, or van.

Specifinė nuoroda

No customer reviews for the moment.